Biosketch
Dr. Marios Panagiotou (PhD, PE) is a Senior Consultant at Nabih Youssef Associates in Los Angeles. His background and experience includes high-end research, teaching, and engineering practice work in earthquake structural engineering with specialization in earthquake resilient design, advanced seismic analysis and design of RC structures as well as on engineering characterization of earthquake ground motions. He has 25 journal publications and numerous conference papers and reports. He is member of the NIST-FEMA Functional Recovery Project Review Panel.
His engineering practice work focuses on the advanced seismic analysis and design of large, complex, and earthquake resilient structures including high-rise buildings, stadiums, and structures that use seismic isolation as well as on the advanced seismic assessment using nonlinear response history analysis of existing RC and steel structures.
Between 2008 and 2015 he was an Assistant Professor of Structural Engineering at University of California, Berkeley (UCB) conducting extensive research on the seismic analysis, design, and experimental testing of RC structures, as well as on earthquake-resilient buildings and bridges that use isolation, rocking components and high-performance materials. As a PhD researcher, he was responsible for the seismic design, analysis, and shake-table testing of a full-scale 7-story building slice at the NEES@UCSD equipment site; this is the tallest structure ever tested on a shake table in U.S. In 2012, he received the ASCE Alfred Noble prize for his journal paper related to the 7-story building slice project. During his academic career he conducted as principal investigator large-scale shake table soil-structure interaction tests of rocking foundations as part of a major research project funded by Caltrans. His research record also includes three full- and large-scale experimental programs on the seismic response of RC components and on earthquake-resilient bridge columns. He has taught graduate courses on seismic analysis and design of RC structures and seismic protective systems at UC Berkeley, UCLA, and University of Southern California.
Journal Publications
25. Mavros M, Panagiotou M, Koutromanos I, Alvarez R, Restrepo JI. (2022). Seismic analysis of a modern 14-story reinforced concrete core wall building system using the BTM-shell methodology. Earthquake Engng Struct Dyn. Free access link
24. Deng X., Murcia-Delso J., Koutromanos I., Panagiotou M. (2021). Nonlinear Truss Models for Strain-based Seismic Evaluation of Planar RC Walls. Earthquake Engineering and Structural Dynamics. Link
23. Alvarez R., Restrepo JI, Panagiotou M. (2020). Plastic Hinge Out-of-Plane Buckling in Structural Walls - Analysis Using the Beam-Truss Model. ASCE Journal of Structural Engineering. Link
22. Alvarez R., Restrepo JI, Panagiotou M, Godinez S. (2020). Analysis of Reinforced Concrete Coupled Structural Walls Via the Beam-Truss Model, Engineering Structures. Link
21. Alvarez R., Restrepo JI, Panagiotou M (2019). Nonlinear Cyclic Beam Truss Model for Analysis of Reinforced Concrete Coupled Structural Walls, Bull. Earthq. Eng., 17(11), https://doi.org/10.1007/s10518-019-00639-8.
20. Nguyen W., Trono W., Panagiotou M., Ostertag C.P, (2017), “Seismic Response of a Rocking Bridge Column using a Precast-Hybrid-Fiber-Reinforced-Concrete (HYFRC) Tube,” Composite Structures, in press. http://www.sciencedirect.com/science/article/pii/S0263822316319791
19. Lu Y. and Panagiotou M. (2016). Three-dimensional beam-truss model for RC walls and slabs, Part II: Model Description and Validation for Coupled Walls and Slabs,” Earthquake Engineering and Structural Dynamics, http://onlinelibrary.wiley.com/doi/10.1002/eqe.2720/full
18. Lu. Y, Panagiotou M, and Koutromanos I. (2016). “Three-dimensional beam-truss model for RC walls and slabs, Part I: Model Description and Validation for Individual Walls,” Earthquake Engineering and Structural Dynamics, http://onlinelibrary.wiley.com/doi/10.1002/eqe.2719/full
17. Visnjic, T., Antonellis G., Panagiotou, M., and Moehle, J. P. (2016). “Experimental Cyclic Response of Large Reinforced Concrete Special Moment Frame Beams,” ACI Structural Journal, Vol. 113, Issue 3.
16. Antonellis G., Gavras A., Panagiotou M., Kutter B., Guerrini G., Sander A., Fox P. (2015). "Shake Table Test of Bridge Columns Supported on Rocking Shallow Foundations," ASCE Journal of Geotechnical and Geoenvironmental Engineering.
http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29GT.1943-5606.0001284
15. Moharrami M., Koutromanos I., Panagiotou M., and Girgin S. C. (2014). “Analysis of Shear-Dominated RC Columns Using the Nonlinear Truss Analogy,” Earthquake Engineering & Structural Dynamics, published online. http://dx.doi.org/10.1002/eqe.2480
14. Trono W., Jen, G. Panagiotou, M., Schoettler M., and Ostertag, C. P. (2014). "Seismic Response of a Damage-resistant Recentering Post-tensioned HyFRC Bridge Column," ASCE Journal of Bridge Engineering, published online.
http://dx.doi.org/10.1061/(ASCE)BE.1943-5592.0000692
13. Panagiotou, M., Trono W., Jen G., Kumar P., and Ostertag, C.P. (2014). “Experimental Response of HyFRC Bridge Columns with Novel Longitudinal Reinforcement Detailing,” ASCE Journal of Bridge Engineering, published online.
http://dx.doi.org/10.1061/(ASCE)BE.1943-5592.0000684
12. Antonellis, G., and Panagiotou, M. (2014). "Seismic Response of Bridges with Rocking Foundations Compared to that of Fixed-base Bridges at a Near-Fault Site," Journal of Bridge Engineering (ASCE), Vol 19, Issue 5. http://dx.doi.org/10.1061/(ASCE)BE.1943-5592.0000570
11. Lu, Y., and Panagiotou, M. (2014). “Characterization and Representation of Near-fault Ground Motions Using Cumulative Pulse Extraction with Wavelet Analysis,” Bulletin of the Seismological Society of America, 104:410-426. http://dx.doi.org/10.1785/0120130031
10. Calugaru, V., and Panagiotou, M. (2014) “Seismic Response of 20-story Base-isolated and Fixed-base RC Structural Wall Buildings at a Near-fault Site,” Earthquake Engineering and Structural Dynamics, Vol. 43, Issue 6, pp. 927-948. http://dx.doi.org/10.1002/eqe.2381
9. Visnjic, T., Panagiotou, M., and Moehle J.P. (2015). “Seismic Response of 20-Story Reinforced Concrete Special Moment Resisting Frame Buildings Designed with Current Code Provisions,” Earthquake Spectra, Vol. 31, No. 2. http://dx.doi.org/10.1193/082112EQS267M
8. Lu, Y., and Panagiotou, M. (2014). “Three-Dimensional Nonlinear Cyclic Beam-Truss Model for Reinforced Concrete Non-Planar Walls,” ASCE Journal of Struct.Eng., Vol. 140, No. 3. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0000852
7. Calugaru, V., and Panagiotou, M. (2012). “Response of Tall Cantilever Wall Buildings Subjected to Strong Pulse -Type Ground Motion,” Earthquake Engineering and Structural Dynamics, Vol. 41, pp. 1301-1318. http://dx.doi.org/10.1002/eqe.1185
6. Panagiotou, M., Restrepo, J.I., Schoettler, M., and Geonwoo, K. (2012). “Nonlinear Truss Model for Reinforced Concrete Walls,” ACI Structural Journal, Vol. 109, No. 2, pp. 205-214. http://dx.doi.org/10.14359/51683631
5. Moaveni, B., He, X.,Conte, J.P., Restrepo, J.I., and Panagiotou M. (2011). “System Identification Study of a Seven-Story Full-Scale Building Slice Tested on the UCSD-NEES Shake Table“, ASCE Journal of Structural Engineering, Vol. 137, No. 6.
http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0000300
4. Panagiotou, M., Restrepo, J.I. (2011). “A Displacement-Based Method of Analysis for Regular Reinforced Concrete Wall Buildings: Application to a Full-Scale 7-Story Building Slice Tested at UC San Diego.” ASCE Journal of Structural Engineering, Vol. 137, No. 6.
2012 Alfred Noble Prize. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0000333
3. Panagiotou, M., Restrepo, J.I., and Conte J.P. (2011). “Shake Table Test of a 7-Story Full Scale Reinforced Concrete Wall Building Slice, Phase I: Rectangular Wall.” ASCE Journal of Struct. Engineering, Vol. 137, No. 6. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0000332
2. Panagiotou, M., and Restrepo, J.I. (2009). “Dual-Plastic Hinge Design Concept for Reducing Higher-Mode Effects on High-Rise Cantilever Wall Buildings.” Earthquake Engineering and Structural Dynamics, Volume 38, Issue 12, pp. 1359-1380. http://dx.doi.org/10.1002/eqe.905
1. Hoehler, M.S., Panagiotou, M., Restrepo, J.I.,. Silva, J.F, Floriani, L., Bourgund, U., and Gassnerc, H. (2009). “Performance of Anchored Pipes in a 7 Story Building During Full-Scale Shake Table Tests.” Earthquake Spectra, Vol 25, Issue 1, pp. 71-91. http://dx.doi.org/10.1193/1.3046286
Conference Papers and Presentations
34. Panagiotou M., Koutromanos I., Mavros M., Deng X., Alvarez R., Restrepo J.I., Murcia-Delso J., Acero G. (2021). Nonlinear Beam-Truss Model (BTM) for Seismic Performance Evaluation of Reinforced Concrete Wall Buildings. 2021 SEAOC Convention Proceedings, San Diego, California.
33. Panagiotou M, (2017), “Seismic Response of Medium-rise and Tall RC Core-Wall Buildings at Near-fault Regions and Simplified Calculation of Design Demands,” Proceeding of Annual Conference of Los Angeles Tall Buildings Seismic Design Council.
32. Visnjic T., Panagiotou M, Moehle J.P. (2017). “Estimating Seismic Shear in Columns of RC Special Moment Frames,” 14th World Conference on Earthquake Engineering, Chile.
31. Moharrami M., Koutromanos I., and Panagiotou M., and Girgin S. (2017). “Analysis of Shear-Dominated Columns Using the Nonlinear Truss Analogy,” 14th World Conference on Earthquake Engineering, Chile.
30. Moharrami M., Koutromanos I., and Panagiotou M. (2015). “Nonlinear Truss Modeling Method for the Analysis of Shear Failures in Reinforced Concrete and Masonry Structures. ATC&SEI 2nd Conference on Improving the Seismic Performance of Existing Buildings and Other Structures, December, San Francisco.
29. Lu. Y., and Panagiotou M. (2015). “Earthquake Damage Resistant Tall Buildings at Near Fault Regions Using Base Isolation and Rocking Core Walls,” Structures Congress, Portland, Oregon. Link
28. Antonellis G., Gavras G., Panagiotou M., Kutter B., Sander A., Guerrini G., Fox P. (2014). “Shake Table Test Response of Large Scale Bridge Columns Supported on Rocking Shallow Foundations,” 10th National Conference on Earthquake Engineering (10NCEE), Anchorage, Alaska.
27. Lu Y. and Panagiotou M. (2014). “Characterization and Representation of Strong Near-Fault Ground Motions Using Wavelet-Based Cumulative Pulse Extraction,” 10th National Conference on Earthquake Engineering (10NCEE), Anchorage, Alaska.
26. Lu. Y., and Panagiotou M. (2014). “Earthquake Damage Resistant Multistory Buildings Using Combination of Base Isolation and Rocking Core Walls,” 1st Huixian International Forum on Earthquake Engineering, Harbin, China, August 16-19.
25. Schoettler M., Eberhard M., Mahin S., Mosalam K., Ostertag C., Panagiotou M., Restrepo J., Stanton J., and Terzic V. (2013). “Advancing the Performance of Bridge Columns: Overview of a Shake Table Test Program,” 7th National Seismic Conference on Bridges and Highways, Oakland, California.
24. Girgin S., Lu Y., Panagiotou M. (2013). “Nonlinear Cyclic Truss Model for Shear-Critical Reinforced Concrete Columns,” 2nd Turkish Conference on Earthquake Engineering and Seismology – TDMSK -2013 September 25-27, 2013, Antakya, Hatay/Turkey
23. Visnjic T., Panagiotou M., Moehle J.P., Antonellis G. (2013). “Experimental Investigation of Large Reinforced Concrete Special Moment Resisting Frame Beams,” 10th International Conference on Urban Earthquake Engineering, Tokyo Japan (Best Presentation Award for Young Researchers - Ms. T. Visnjic – in the Area of Structural Engineering-Concrete).
22. Trono W., Jen G., Ostertag C., Panagiotou M. (2013). “Seismic Response of a Rocking, Post-Tensioned HyFRC Bridge Column,” 10th International Conference on Urban Earthquake Engineering, Tokyo Japan.
21. Lu Y., Panagiotou M. (2013). “Three-Dimensional Nonlinear Beam-Truss Model for Non-Planar Reinforced Concrete Walls,” 10th International Conference on Urban Earthquake Engineering, Tokyo Japan.
20. Visnjic T., Panagiotou M., Moehle J.P. (2012). “Seismic Response of Two 20-Story Reinforced Concrete Special Moment Frames Designed with Current Code Provisions,” 15th World Conference on Earthquake Engineering, Lisbon, Portugal.
19. Trono W., Jen G., Ostertag C., Panagiotou M. (2013). “Tested and Modeled Seismic Response of a Rocking, Post-tensioned HyFRC Bridge Column,” 7th National Seismic Conference on Bridges and Highways, Oakland, California.
18. Calugaru, V., and Panagiotou, M. (2011). “Earthquake-Resistant Tall Reinforced Concrete Buildings Using Seismic Isolation and Rocking Core-Walls” The 4th Japan – Greece Workshop, Seismic Design, of Foundations, Innovations in Seismic Design, and Protection of Cultural Heritage, Kobe, Japan, October 6-7, 2011.
17. Calugaru, V., and Panagiotou, M. (2011). “Seismic Isolation of Tall Cantilever Wall Buildings Using One or More Isolation Planes” 8th International Conference on Urban Earthquake Engineering, March 7-8, 2011, Tokyo Institute of Technology, Tokyo, Japan.
16. Calugaru, V., and Panagiotou, M. (2010). “Seismic Isolation Using Single and Dual Shear Hinging of Tall Cantilever Wall Buildings Subjected to Near Fault Ground Motions.” 9th US National and 10th Canadian Conference on Earthquake Engineering, Toronto, July 25-29.
15. Panagiotou, M., Calugaru, V., and Visnjic, T. (2009). “Higher Mode Effects on the Seismic Response of Tall Cantilever Wall Buildings Subjected to Near Fault Ground Motions.” 78th SEAOC Annual Convention, September 23-26, San Diego, CA.
14. Barbosa, A.R., Panagiotou, M., Conte, J.P., and Restrepo, J.I. “Comparison of Dynamic Strut-and-Tie and Fiber Beam-Column Models for the UCSD Seven-Story Full-scale Building Slice Test.” in Proceedings of the Sixth International Conference on Urban Earthquake Engineering, Tokyo, Japan, March 2009.
13. Moaveni, B., Barbosa, A.R., Panagiotou, M., Conte, J.P., Restrepo, J.I. “Uncertainty Analysis of Identified Damping Ratios in Nonlinear Dynamic Systems.” In Proceedings of the 27th International Modal Analysis Conference (IMAC-XXVII), Orlando, Florida, USA, February 2009. Society for Experimental Mechanics.
12. Panagiotou, M., and Restrepo, J.I., “Lessons Learnt from the UCSD Full-scale Shake Table Testing on a 7-Story Residential Building Slice.” SEAOC convention, Lake Tahoe, September 26-29, 2007.
11. Panagiotou, M., and Restrepo, J.I., “A modification of the equivalent lateral force procedure for use in performance based seismic design of high rise buildings”. 12th U.S.-Japan Workshop on Structural design and Construction Practices, September 10 - 12, Hawaii, 2007.
10. Hoehler, M.S., Silva, J.F., Floriani, L., Bourgund, U., Gassner, H., Restrepo, J.I, Panagiotou, M., “Full-scale shake table test of pipes anchored in a 7-story RC building.” FIP Symposium on "Connections between Steel and Concrete.” Stuttgart, Germany, September 2007.
9. Panagiotou, M., Restrepo, J.I., “Model Calibration for the UCSD 7-Story Building Slice.” NEES/UCSD Seminar on Analytical Modeling of Reinforced Concrete Walls for Earthquake Resistance, La Jolla, California, USA, December, 2006.
8. Panagiotou, M., Restrepo, J.I., Conte, J.P., and Englekirk, R.E., “Shake Table Response of a Full Scale Reinforced Concrete Wall Building Slice.” Structural Engineering Association of California Convention, Long Beach, CA, USA, September, 2006.
7. Panagiotou, M., Restrepo, J.I., and Englekirk, R.E., “Experimental Seismic Response of a Full Scale Reinforced Concrete Wall Building.” First European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, 3-8 September, 2006.
6. Yang, F., Panagiotou, M., Bock, Y., Conte, J.P., and Restrepo, J.I., “Shake Table Tests of a Full Scale Reinforced Concrete Wall Building: Integration of Real Time 50 Hz GPS Displacements and Accelerometer Data.” 4th World Conference on Structural Control and Monitoring, San Diego, California, USA, July, 2006.
5. Panagiotou, M., Restrepo, J.I., and Englekirk, R.E., “Seismic Response of Reinforced Concrete Wall Buildings.” 2nd International fib Congress, Naples, Italy, June, 2006.
4. Panagiotou, M., Restrepo, J.I., Conte, J.P., and Englekirk, R.E., “Seismic Response of Reinforced Concrete Wall Buildings.” 8th National Conference of Earthquake Engineering, San Francisco, CA, USA, April, 2006.
3. Psarropoulos, P., Panagiotou, M., Gantes, C.J., Gazetas, G., “Dynamic Interaction between Soil and Wind Turbines.” 5th National Conference of Geotechnical and Geoenviromental Mechanics, Ksanthi, Greece, May, 2006.
2. Panagiotou, M., Psarropoulos, P., Gantes, C.J., Gazetas, G., “The role of Dynamic Soil-Foundation-Structure Interaction in the Design of Wind Turbine Towers.” 5th National Conference of Steel Structures, Ksanthi, Greece, September, 2005.
1. Gantes, C.J., Panagiotou, M., and Fragopoulos, T. “Influence of Initial Imperfections for the Design of Buckling-Prone Structures.” ICES’03: International Conference on Computational & Experimental
Technical Reports
27. Panagiotou M. and Koutromanos I. (2020). Advanced and Practical Seismic Analysis of Reinforced Concrete Walls and Building Systems Using the BTM-Shell Methodology in the Program FE-MultiPhys. Online School of Earthquake Resilient Design, Los Angeles, CA, 80 pages. Link
26. Gavras Andreas, Antonellis Grigorios, Panagiotou Marios, and Kutter, Bruce L. (2015). “Analytical and Experimental Development of Bridges with Foundations Allowed to Uplift- Part II: Analytical Studies” Report to California Department of Transportation.
25. Lu. Y, Panagiotou M., and Koutromanos I. (2014). “Three-dimensional Beam-Truss Model for RC Walls and Slabs Subjected to Cyclic Static or Dynamic Loading,” Pacific Earthquake Engineering Research Center. PEER report 2014/18.
24. Nguyen W., Trono W., Panagiotou M., Ostertag C. P. (2014). “Seismic Response of a Hybrid Fiber-Reinforced Concrete Bridge Column Detailed for Accelerated Bridge Construction,” PEER 2014/09. Pacific Earthquake Engineering Research Center.
23. Antonellis, Grigorios; Gavras, G. A.; Panagiotou, Marios; Kutter, Bruce L.; Guerrini, Gabriele; Sander, A.; Fox, P. J.; Restrepo, Jose I.; Mahin, Stephen A. “Shake-table test response of bridge columns supported on rocking shallow foundations,” Report No. UCB/SEMM-2014/07, Department of Civil and Environmental Engineering, UC Berkeley, Berkeley, USA.
22. Co-author of Chapter 1 (Strong Motion Records) of the report: “PEER Preliminary Notes and Observations on the August 24, 2014, South Napa Earthquake,” Editors: G. S. Kang and S. A. Mahin, Pacific Earthquake Engineering Research Center, Report No. 2014/13.
21. Lu Y. and Panagiotou M. (2013). “Nonlinear Seismic Site Response and Soil Foundation Structure Interaction of a 20-story Structural Wall Building Subjected to Pulse-like Excitation.” Report No. UCB/SEMM-2013/08, Department of Civil and Environmental Engineering, UC Berkeley, Berkeley, USA.
20. Panagiotou M., Visnjic T., Antonellis G., Galanis P., Moehle J.P. (2013). “Effect of Hoop Reinforcement Spacing on the Cyclic Response of Large Reinforced Concrete Special Moment Frame Beams,” Pacific Earthquake Engineering Research Center, PEER report 2013/16.
19. Antonellis, G., and Panagiotou, M. (2013). “Seismic Design and Performance of Bridges with Columns Supported on Rocking Foundations,” Pacific Earthquake Engineering Research Center, PEER report 2013/21.
18. Antonellis, G., and Panagiotou, M. (2013). "Seismic Responses of Bridges with Rocking Foundations at a Near-Fault Site," UCB/SEMM-2013/04, Department of Civil and Environmental Engineering, UC Berkeley, Berkeley, USA.
17. Zimmerman R. B., Panagiotou M., and Mahin S. (2013). “Numerical modeling and seismic retrofit for shear failure in reinforced concrete columns Report No. UCB/SEMM-2013/03, Department of Civil and Environmental Engineering, UC Berkeley, Berkeley, USA.
16. Trono W., Jen, G. Ostertag, C. P., and Panagiotou, M. (2013). "Shake-table Test Response of a Rocking Post-tensioned HyFRC Bridge Column," Report No. UCB/SEMM-2013/02, Department of Civil and Environmental Engineering, UC Berkeley, Berkeley, USA.
15. Lu, Y., and Panagiotou, M. (2013). “Characterization and Representation of Pulse-like Ground Motions Using Cumulative Pulse Extraction via Wavelet Analysis,” Report No. UCB/SEMM-2013/01, CEE Department, UC Berkeley, Berkeley, USA.
14. Calugaru, V., and Panagiotou, M. (2012). “Seismic Response of 20-story Base-isolated and Fixed-base RC structural wall buildings subjected to near-fault ground shaking,” Report No. UCB/SEMM-2012/03, Department of Civil and Environmental Engineering, UC Berkeley, Berkeley, USA.
13. Visnjic, T., Panagiotou, M., and Moehle J.P. (2012). “Seismic Response of four 20-Story Reinforced Concrete Special Moment Resisting Frames Designed with Current Code Provisions,” Report No. UCB/SEMM-2012/02, Department of Civil and Environmental Engineering, UC Berkeley, Berkeley, USA.
12. Lu, Y., and Panagiotou, M. (2012). “Three-Dimensional Cyclic Beam-Truss Model for Non-Planar Reinforced Concrete Walls,” Report No. UCB/SEMM-2012/01, Department of Civil and Environmental Engineering, UC Berkeley, Berkeley, USA.
11. Calugaru, V., and Panagiotou, M. (2011). “Earthquake-resistant and Resilient Tall Reinforced Concrete Buildings Using Base Isolation and Rocking Core-walls,” Report No. UCB/SEMM-2011/09, Department of Civil and Environmental Engineering, UC Berkeley, Berkeley, USA.
10. Calugaru, V., and Panagiotou, M. “Response of Tall Cantilever Wall Buildings to Strong Pulse – Type Seismic Excitation” Report No. UCB/SEMM-2011/05, Department of Civil and Environmental Engineering, UC Berkeley, Berkeley, 2011.
9. Panagiotou, M., Restrepo, J. I., “Nonlinear Cyclic Truss Model for Strength Degrading Plane Stress Reinforced Concrete Elements,” Report No. UCB/SEMM-2011/01, Department of Civil and Environmental Engineering, UC Berkeley, Berkeley, 2011.
8. Kumar, P., Jen, G., Trono, W., Lallemant, D., Panagiotou, M., Ostertag, C.P., "Self Compacting Hybrid Fiber Reinforced Concrete Composites for Bridge Columns” Pacific Earthquake Engineering Research Center, PEER report 2011/106, September 2011.
7. Panagiotou, M., Genwoo, K., Barbosa, A.R., and Restrepo, J.I., "Response Verification of a Reinforced Concrete Bearing Wall Building Located in an Area of High Seismic Hazard.” Portland Cement Association Research and Development, Serial No. SN2961, Illinois, 2009.
6. Panagiotou, M., Genwoo, K., Barbosa, A.R., and Restrepo, J.I., "Response Verification of a Reinforced Concrete Bearing Wall Building Located in an Area of High Seismic Hazard.” SSRP Report 2008/05. UCSD - Department of Structural Engineering, La Jolla, California, 2008.
5. Panagiotou, M., Geonwoo, K., Barbosa, A., Restrepo, J.I., “Response Verification of a Reinforced Concrete Bearing Wall Building Located in an Area of High Seismic Hazard.” Report to PCA, September, 2007.
4. Panagiotou, M., Restrepo, J.I., and Conte, J.P., “Shake table test of a 7‑story full scale reinforced concrete structural wall building slice – Phase II: T-wall section.” Report No SSRP–07/08, University of California, San Diego, 2007.
3. Panagiotou, M., Restrepo, J.I. and Conte, J.P., “Shake table test of a 7‑story full scale reinforced concrete structural wall building slice – Phase I: Rectangular wall.” Report No SSRP–07/07, University of California, San Diego, 2007.
2. Veletzos, M.J., Panagiotou, M., and Restrepo, J.I., “Post Seismic Inspection and Capacity Assessment of Reinforced Concrete Bridges.” University of California San Diego, Structural Systems Research Project, La Jolla, CA, July, 2006.
1. Restrepo, J.I., Panagiotou, M., “Bart Aerial Guideway Shear Key Tests.” University of California San Diego, Department of Structural Engineering, La Jolla, CA, October, 2005.
Invited Presentations
52. Mavros M., Panagiotou M, Koutromanos I., Alvarez R., Restrepo J. (2021), “Nonlinear beam-truss models for the seismic performance evaluation of multi-story RC wall building systems,” Engineering Mechanics Institute Conference, Virtual Event, May 25-28.
51. Koutromanos I., Panagiotou M, Xianjue D., Murcia-Delso J. (2021), “Truss Modeling Approach for Advanced Seismic Analysis and Evaluation of RC Wall Components and Systems,” Engineering Mechanics Institute Conference, Virtual Event, May 25-28.
50. Panagiotou M. (2021). “Analysis, Design, and Large-scale Experimental Testing of Earthquake Resilient Buildings and Bridges at Near-fault Sites,” Webinar, Department of Civil Engineering, University of Patras, Greece.
49. Panagiotou M. (2020). “Advanced Seismic Analysis of Reinforced Concrete Components and Building Systems Using the Beam-Truss-Model,” Webinar, Opensees Workshop, Turkish Association of Earthquake Engineering, December. Link
48. Panagiotou M. “Improving the Earthquake Functional Recovery of RC Wall Buildings: Analysis, Design, and Large-scale Testing,” SEAOSC Webinar, 2020 Year-End Technical Summit - Part 2, June 17, 2020.
47. Harden C. and Panagiotou M. “Recent Seismic Design Guide Implementation for Spread Footings,” Workshop 1030, Increased Use of Spread Footings on Soils to Support Highway Bridge Projects, Presentation P19-20125, Transportation Research Board, TRB 98th Annual Meeting, January 13–17, 2019
46. Panagiotou M., Lu Y., Koutromanos I. (2017). Nonlinear Seismic Analysis of RC Wall Buildings Using the Beam-truss Model, Technical Session of the ACI 447 Committee, ACI Convention.
45. Panagiotou M, (2017), “Seismic Response of Medium-rise and Tall RC Core-Wall Buildings at Near-fault Regions and Simplified Calculation of Design Demands,” Proceeding of Annual Conference of Los Angeles Tall Buildings Seismic Design Council.
44. Mohammadreza Moharrami (presenter), Ioannis Koutromanos, Marios Panagiotou Analysis of shear-dominated reinforced concrete columns and masonry walls using nonlinear truss models
43. Yuan Lu (presenter), Marios Panagiotou. Three-dimensional seismic analysis and design of damage resistant tall rocking core wall buildings. EMI Conference, Stanford, CA, June 2015.
42. Andreas G. Gavras, (presenter) Grigorios Antonellis, Marios Panagiotou, Bruce L. Kutter. “Displacement-based design and nonlinear analysis of bridges with rocking foundations and plastic hinges at the top of the columns.” EMI Conference, Stanford, CA, June 2015.
41. Grigorios Antonellis, Andreas Gerasimos Gavras (presenter), Marios Panagiotou, Bruce Lloyd Kutter.”Shake table test of large-scale bridge columns with rocking foundations.” EMI Conference, Stanford, CA, June 2015.
40. Earthquake-resilient Tall Buildings and Highway Bridges at Near-fault Regions Using Isolation and Rocking Components, Nabih Youssef and Associates, Los Angeles, April 2015.
39. Earthquake-resilient Tall Buildings and Highway Bridges at Near-fault Regions Using Isolation and Rocking Components, Thornton Tomasetti, San Francisco, April 2015.
38. Earthquake-resilient Tall Buildings and Highway Bridges Using Isolation and Rocking Components, Izmir Technical Chamber of Civil Engineering, Izmir, Turkey, January, 2015.
37. Earthquake-resilient Multistory Buildings Using Base Isolation and Rocking Core-walls, 6th Kwang-Hua Forum, Shanghai, China, December 2014.
36. Three-dimensional Seismic Analysis of 20-story Tall RC Wall Buildings with Conventional or Rocking Core-Walls,’ presentation to ACI 374 Committee, ACI Fall 2014 Convention, Washington DC.
35. “Characterization and Representation of Near-fault Pulse-like Ground Motions and their Effect on Nonlinear Structural Response: Implications for Damage-Resistant Design of Structures in Cephalonia,” International Workshop on Seismic Hazard and Earthquake Engineering, September 24-25, 2014, Cephalonia, Greece.
34. “Earthquake Damage Resistant Multistory Buildings Using Combination of Base Isolation and Rocking Core Walls,” 1st Huixian International Forum on Earthquake Engineering, Harbin, China, August 16-19, 2014.
33. “Earthquake Resilient Design of Reinforced Concrete Tall Buildings and Highway Bridges at Near Fault Regions,” Macau University, Macau, China, March 28th, 2014.
32. “Seismic Analysis Design and Retrofitting of Multistory Buildings at Near Fault Regions,” Hong Kong Architecture Services Department, Hong Kong, China, March 27th, 2014.
31. “Three-dimensional Seismic Analysis of Tall Reinforced Concrete Wall Buildings at Near Fault Regions and Seismic Design Implications,” Hong Kong Institute of Steel Construction, Hong Kong, China, March 26th, 2014.
30. “Earthquake Resilient Design of Reinforced Concrete Tall Buildings and Highway Bridges at Near Fault Regions,” Arup Hong Kong, Hong Kong, China, March 26th, 2014.
29. “Earthquake Resilient Design of Reinforced Concrete Tall Buildings and Highway Bridges at Near Fault Regions,” Department of Civil Engineering, Hong Kong University of Science and Technology, Hong Kong, China, March 25th, 2014.
28. “Three-dimensional Seismic Analysis of Reinforced Concrete Wall Buildings and Seismic Design Implications,” ACI 374 Committee, Reno, Nevada, March 24th, 2014. (Presentation given by Ms. Y. Lu)
27. “Earthquake Resilient Design of Reinforced Concrete Tall Buildings and Highway Bridges at Near Fault Regions,” Department of Civil Engineering, Hong Kong University, Hong Kong, China, March 24th, 2014.
26. “Earthquake Resilient Design of Reinforced Concrete Tall Buildings and Highway Bridges at Near Fault Regions,” Department of Civil and Environmental Engineering, Nanyang Technological University, Singapore, February 24th, 2014.
25. “Foundation Rocking as a Bridge Seismic Design Strategy,” Northridge20 Symposium, January 16-17, Los Angeles, California.
24. “Using Base Isolation and Rocking for Earthquake Resilient Design of Structures in Near Fault Regions,” 10th NEES/E-Defense meeting, December 11-13, 2013, Kyoto, Japan.
23. “Three Dimensional Beam Truss Model of Reinforced Concrete Core Walls Under Seismic Loading,” ACI Committee 447, ACI Fall 2013 Convention, Phoenix.
22. “Experimental Shake Table Test Response of Bridge Columns Supported on Rocking Shallow Foundations,” ACI Committee 341, ACI Fall 2013 Convention, Phoenix.
21. “Using Seismic Isolation and Rocking to Design Buildings and Bridges in Near-Fault Regions,” FORELL/ELSESSER ENGINEERS INC., San Francisco, California, June 2012.
20. “Large-scale Shake Table Tests of Bridge Piers and Seismic Response of Bridges with Rocking Foundations,” Workshop on design, analysis, and research related to highly nonlinear SSI including rocking foundations – an outcome of the NSF grant funded through the NEESR program. Workshop Steering Committee: B. Kutter, T. Hutchinson, L. Mejia, M. A. Moore. June 7-8, 2013, URS Corporation, Oakland, California.
19. “Using Base Isolation and Rocking for Earthquake Resilient Design of Structures in Near Fault Regions,” Presentation to Advisory Council of CEE Department of University of California, Berkeley. Berkeley, April 2013.
18. “Displacement-Based Design and Experimental Results of a Full-Scale 7-Story Building Slice Tested at UC San Diego.” ACI-374 Committee, ACI Spring 2012 Convention, Dallas, March 19th, 2011.
17. “Earthquake Resistant and Resilient Tall Buildings Using Seismic Isolation and Rocking Core Walls,” SEMM seminar, Seismology & Structural Standards Committee of SEAONC, November 2011.
16. “Earthquake Resistant and Resilient Tall Buildings Using Seismic Isolation and Rocking Core-Walls,” SEMM seminar, October 2011.
15. “Earthquake Resistant and Resilient Tall Buildings Using Seismic Isolation and Rocking Core-Walls,” The 4th Japan – Greece Workshop, Seismic Design, of Foundations, Innovations in Seismic Design, and Protection of Cultural Heritage, Kobe, Japan, October 6-7, 2011.
14. “Seismic Performance of Bridges with Foundations Designed to Uplift,” Pacific Earthquake Engineering Research Center Annual Meeting, October 2011.
13. “Earthquake-Resistant and Resilient Tall Buildings Using Seismic Isolation and Rocking Core-Walls,” Pacific Earthquake Engineering Research Center Annual Meeting, October 2011.
12. “Inelastic Deformation, Shear Force Seismic Demands in Tall RC Wall Buildings and Dual Plastic Hinge Design Approach, ” ACI 318-0H Subcommittee of ACI 318, ACI Fall 2011 Convention, Cincinnati, Ohio, October, 2011.
11. “Performance-based Evaluation of the Seismic Response of Bridges with Foundation Uplift.” NEES&PEER Annual Meeting, San Francisco, CA, October 8-9, 2010.
10. “Displacement-Based Design and Experimental Results of a Full-Scale 7-Story Building Slice Tested at UC San Diego.” ACES Workshop: Performance-Based Earthquake Engineering Corfu, Greece, July 4-7, 2009.
9. “Displacement-based Design and Experimental Results of a Full-Scale 7-Story Building Slice Tested at UC San Diego.” Earthquake engineering by the beach a relaxed workshop on performance-based earthquake engineering, Anacapri, Italy, July 2-4 2009.
8. “Seismic Design, Testing and Analysis of Tall Reinforced Concrete Wall Buildings.” Geotechnical Graduate Student Society at Department of Civil and Environmental Engineering at UC Davis, May 21, 2009.
7. “Seismic Response of Tall Buildings.” Structural Engineering Association of Northern California (SEAONC), 2009 Spring Seminar, San Francisco, March 4, 2009.
6. “Recent Experimental Data and its Relevance for Design.” Tall Building Modeling Guidelines and Design Criteria, Los Angeles Tall Buildings Structural Design Council, Los Angeles, May 9, 2008.
5. “Displacement Based Design of Multistory Structural Wall Buildings and Lessons Learnt from the UCSD 7-Story Building Shake Table Test.” Rutherford and Chekene Structural and Geotechnical Consulting Engineers, San Francisco, CA, USA, July 24, 2007.
4. “Displacement Based Design of Multistory Structural Wall Buildings and Lessons Learnt from the UCSD 7-Story Building Shake Table Test.” Degenkolb Engineers, San Francisco, CA, USA, July 25, 2007.
3. “Displacement Based Design of Multistory Structural Wall Buildings and Lessons Learnt from the UCSD 7-Story Building Shake Table Test.” KPFF Consulting Engineers, Los Angeles, CA, USA, July 10, 2007.
2. “Displacement Based Design of Multistory Structural Wall Buildings and Lessons Learnt from the UCSD 7-Story Building Shake Table Test.” National Technical University of Athens (NTUA), June 10, 2007.
1. “Shake Table Response of a Full-scale Reinforced Concrete Wall Building Slice.” University of Arizona, December, 2006.